How To Make A Tension Set Ring

open ring shank laying flat Stone setting provides a wealth of opportunities to build on your jewellery making skill set. From the classic prong setting to the more elaborate pavé setting, there is a technique for every level.

Today however, we will exist focusing on the tension setting. In this guide, we'll talk you through how to make a tension ring step by stride, equally well every bit further information on what the setting is and the different sorts of tools you lot'll have to collect. Gear up to go started?

Discover everything you need to know about tension setting rings, below.

What is a Tension Setting?

So, what is a tension setting? Before we delve into the method of making a tension set diamond ring, permit's go through what makes this technique unique. The main feature to note is the fact that it is non held in past prongs or a bezel, but pressure. This means that only a select few types of rock can be used, including diamonds, rubies, moissante and sapphires. With ii pieces of metallic running along either side of the stone to hold it in place, all dimensions need to be advisedly measured to ensure the rock is held securely.

Tools Needed for Creating a Tension Setting Ring

To endeavor this advanced technique, you'll demand to pick up these key pieces of kit:

Foursquare wire
Circular-cut stone
Calipers
Ring clamp
Apartment nose pliers
Hand torch
Steel mandrel
Dremel tool
Hart burr
Thin cut bicycle
Protective gloves
Bench vice
Knife edge needle file

Pace by Pace Tension Set up Ring Tutorial

At present yous know what the tension setting is and the tools you'll need for the chore, here'southward how to make a tension gear up ring, step past step:

Manipulate the wire. Take the square wire (in an alloy of your choosing) and measure out the length of the ring. Once this is done, wearing your gloves, wrap the wire effectually the mandrel using your hand torch and pliers as you go. Practise this until the wire overlaps on each side past a quarter of the circumference of the ring, keeping it equally tight as possible. <strong>Top Tip!</strong> The gentler you are with the grip on the wire, the less damaged it will be, meaning you can use more of the metal.
Trim the ends. Side by side, place the wrapped wire in the ring clamp then continue to cut the excess ends off. Do this by using your Dremel with a thin cutting wheel and brand sure that the cut is as perpendicular as possible.
Straighten and prepare the ring. The previous overlap will have caused the band to curve slightly, and so it's time to straighten information technology out. This will aid to secure the stone. Place the ring in a bench vice with wool to protect confronting scratches, slowly use force per unit area and keep checking the ring to come across when it is perfectly direct. Once washed, identify the band back in the vice and utilise your calipers to score the diameter of the stone onto the metallic. And then, use the same cutting bicycle and use the needle file to neaten up the edges.
Cut the seat. Test to run across if the stone fits in the gap. If it does, you're ready to make the seat. If not, you may need to get back in with the step above to create the right sized gap. Using your Dremel tool with a small hart burr, cut a seat for the stone on both of the insides of the ring, in the center and roughly 0.5mm from the height. Top tip! If you lot're new to this practice, try your hand at cutting some seats in the leftover metal.
Set up the stone. In order for the right amount of tension to be created, you'll demand to clamp the band in the vice, with the gap on its side so you can run into it closing in. And then, slowly squeeze the clamp until the ends bear on. Have out the band, open the gap temporarily to fit the stone and agree in place. Once you hear that ever and then satisfying click, you're expert to go!

Feel like giving this technique a go yourself? Now you know how to make a tension set ring, collect all the bullion and jewellery tools you lot need for this and all of your other jewellery making projects. And if you're looking for some inspiration, be sure to browse through our vast range of blogs in the equipment and technique focus section of our site.

Save this for subsequently

Author: Cooksongold